Daikin DAR09 Service Instructions Manual page 11

PRODUCT IDENTIFICATION
Daikin® BRAND X-R410A 13 SEER SINGLE STAGE NOMINAL CONDENSERS
Model/Rev
DX13SN0[18-36]1AA
DX13SN0[42-60]1
DX13SN0611AA
DX13SN0[18-61]1AB
DX13SN0[18-24]1AC
DX13SN0[18-24]1BA
DX13SN0241BA
DX13SN0[30-60]1AC
DX13SN0241BB
DX13SN0301AD
DX13SN0611AC
DX13SN0[18,36,42,48,60]1AD
DX13SN0241BC
DX13SN0301AE
DX13SN0181BA
DX13SN0181BB
DX13SN0181AE
DX13SN0[36,42,48,60]1AE
DX13SN0421AF
DX13SN0421AG
DX13SN
Introduction of Daikin 1.5 ton 13 SEER R-410A Condensers conversion to 23" chassis for
the 1.5 - 3 ton models.
Changed from current four piece louver assembly to a two-piece louver plus a corner post
on 26" and 29" chassis.
Introduction of Daikin 13 SEER R-410A Condensers that supplement our current 5 ton
models.
One hairpin removed (one hole at the top of the coil and one hole at the bottom of the coil
will remain open). No change in coil circuits.
Refrigerant quantity reduction.
Initial release of Daikin Base Tier 1.5T and 2.0T models.
Convert ANX13 / 14 1.5 and 2 ton models to Rechi compressors.
These will be a copy of GSX Rechi models.
Refrigerant charge reduction.
Create new Motor & Replace 0131M00294 with 0131M00800
Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
Factory Refrigerant Charge Optimization
Replaced 50N382XV-ZAKM Rechi compressor with rechi 50N382YV-ZAKM compressor
in all models.
Replaced motor 0131M000266 with 0131M00811
Replaced motor 0131M00018P with 0131M00813
Change from copper wound compressor motor to aluminum wound compressor motor.
ZP34K5EPFV130 and ZP36K5EPFV130.
11
Description
DX13SN*