Automatic Program - Philips 26PW9100D User Manual

P
Y
our TV can automatically set itself for local
area (or Cable TV) channels. This makes it
easy for you to select only the TV stations in your
area when the CHANNEL (+), (–) buttons are
pressed.
1 Make sure the antenna or cable signal con
nection has been completed before AUTO
PROGRAM is activated.
2
Press the MENU button on the remote control
to show the onscreen menu.
3
Press the CURSOR UP˚
scroll though the onscreen menu until the word Install
is highlighted.
4
Press the CURSOR RIGHT˙
display the Install menu features.
5
Press the CURSOR UP˚
scroll through the Install features until the word
Auto Program is highlighted.
6
Press the CURSOR RIGHT˙
start the select antenna or cable mode.
7
When finished, press the MENU button twice
to remove the menu from the TV's screen.
8
Use the A/D button on the Remote Control to
switch between Digital and Analog channels to
new your programs
* Digital installation may take 20 to 40 minutes
depending on the number of channels avail
able.
H
ELPFUL
When CABLE is selected, channels 1-125 are avail-
able.
When ANTENNA is selected, channels 2-69 are
available.
When you install in Digital mode, it will install both
Digital and Analog channels simultaueously.
P
ROGRAMMING ART
˚ or DOWN¸ ¸ buttons to
˙ button to
˚ or DOWN¸ ¸ buttons to
˙ button to
H
INTS
2 - A P
UTOMATIC
10
ROGRAM