Block/Clear All Channels At The Same Time - Philips 26PW9100D User Manual

B
LOCK
A
fter blocking specific channels there may come
a time when you want to block or clear all the
channels at the same time.
Once you've entered your access code and the
AutoLock™ features are displayed on the screen:
1
For digital mode:
Press the CURSOR DOWN ¸
Block channel. Press the CURSOR RIGHT ˙
button to enter the Channel blocking menu.
For analogue mode:
Press the CURSOR DOWN ¸
either Clear All or Block All.
2
For digital mode:
If All ch. is locked, press the OK button to
clear all blocked channels. All channels will be
viewable.
If All ch. is unlocked, press the OK button to
lock all channels. When this is done, ALL avail-
able channels will be blocked from viewing.
For analogue mode:
If Clear All is selected, press the CURSOR
RIGHT ˙ ˙ button to clear all blocked channels.
All channels will be viewable.
If Block All is selected, press the CURSOR
RIGHT ˙ ˙ button to turn the control On or Off.
When On is selected, ALL available channels
will be blocked from viewing.
3
When finished, press the MENU button four
times to remove the menu from the screen.
NOTE: If you ever forget your code, the 0, 7, 1, 1 code
is the factory default and can be used to enter and create
a new access code. Enter the above number twice.
H
ELPFUL
Use the A/D button on the Remote Control to
switch between Digital and Analog channels.
/C A C
LEAR LL
¸ button to select
˙
¸ button to select
H
INTS
A T
HANNELS T HE
24
S T
AME IME