Block Channels Part 1 - Setting Up An Access Code - Philips 26PW9100D User Manual

B
LOCK
O
ver the next few panels you'll learn how to
block channels and get a better understanding
of the rating terms for certain programming.
First, let's start by learning how to set a personal
access code:
1
Press the MENU button on the remote to display
the onscreen menu.
2
Press the CURSOR UP˚
buttons until the word Features is highlighted.
Press the CURSOR RIGHT ˙
3
display the Features menu options.
4
Press the CURSOR UP˚
buttons until the words Auto Lock™ are
highlighted.
5 Press the CURSOR RIGHT ˙
screen will read, "Access Code - - - - ."
6
Using the NUMBERED buttons, enter
0, 7, 1, 1. "XXXX" appears on the Access Code
screen as you press the numbered buttons.
"Incorrect Code" will appear on the screen,
and you will need to enter 0, 7, 1, 1 again.
7
For analogue mode: The screen will ask you to
enter a "New Code."
Enter a "new" 4 digit code using the NUM-
BERED buttons. The screen will then ask you to
CONFIRM the code you just entered. Enter your
new code again. "XXXX" will appear when you
enter your new code and then display the
AutoLock™ menu options.
8
Use the A/D button on the remote control to
switch between Digital and Analog channels.
Proceed to the next page to learn more...
C P
HANNELS ART
˚ or DOWN ¸ ¸
˙ button to
˚ or DOWN ¸ ¸
˙ button. The
1 - S U
ETTING P AN
22
A C
CCESS ODE