Auto Program - Philips 14PT6441/37 User Manual

your TV can automaticallyset itself for
ocalarea (or Cable TV) channels.This
makes it easy for you to selectonly the TV
I
sta_ons in your area when the CHANNEL
(+), (-) buttonsare presse&
Note: Make s_re the antenna or cable sig-
nal connectio_has bee_ completedbefore
AUTOPROGRAM is activated.
Press the MENU button on the remote to show the on-screen
menu.
Press the CURSOR UP/\ or DOWN V buttons to scroll
through the on-screen menu until
the word INSTALL is highlighted.
Press the CURSOR RIGHT >
button to display the INSTALL
menu features.
Press CURSOR UP A or
DOWN V buttons to scroll the
Install features until the words
AUTO PROGRAM are highlight-
ed,
Press the CURSOR RIGHT >
button to start the Auto Program
scanning of channels. A uto
Programming will store all available
channelsin the TV's memory then
tune to the lowest availablechan-
nel when done,
When finished, press the STA-
TUS/EXIT button to remove
the menu from the TV's screen.
i ; !
o C_=_/d4
[ •
When CABLE is selected, channels I-
125 are available,
When ANTENNA is selected, chan-
nels 2-69 are available,
When AUTO is selected, the TV will
automatically set itself COthe correct
mode based on the type of signal it
detects when the AUTO PROGRAM
feature is activated,