Omron F440-F User Manual page 11

Component Installation and Handling
• Turning OFF the Power
When a message is displayed indicating that a task is in progress, do not turn OFF the power. Doing
so causes the data in the memory to be corrupted, resulting in the product not operating properly
upon the next start-up.
When turns OFF, conform the followings proceedings have completed. and then operate again.
• When saves using the camera:
Confirm the save processing is completed and next operation is possible.
• When saves using communication command:
Intended command is completed.
• Setting of Power Source
The power source need to be supplied from DC power source apparatus which is taken a save
ultra-low-voltage circuit: to protect high voltage.
Maintenance
• Turn OFF the power and ensure the safety before maintenance.
• Optical components should be cleaned with a lens-cleaning cloth.
• Lightly wipe off dirt with a soft cloth.
• Do not use thinners or benzene.
• To ensure safe access for operation and maintenance, separate the camera as much as possible
from high-voltage equipment and power machinery.
• When maintaining the product, be careful not to contact high pressure or other electrical equipment.
F440-F C-Mount Smart Camera User Manual
Precautions for Correct Use
11