ResMed Mirage Micro User Manual page 5

Disassembling the Mask
1
Detach the air tubing.
4
Remove the swivel from
the elbow.
6
Remove the forehead
support pads from the
forehead support.
2
Unclip the headgear clips
and unthread the upper
headgear straps. It is not
necessary to remove the
headgear clips from the
headgear.
5
Note the position on the dial for the next time you use
the mask. Unscrew and remove the dial (a) then pull the
forehead support (b) out of the mask frame.
7
Remove the cushion
from the mask frame.
4
3
Remove the elbow
assembly from the mask
frame by pivoting from the
bottom edge.
(b)
8
Remove the ports cap
from the mask frame.
(a)