Thank you for choosing the Mirage Activa™ LT. Intended Use The Mirage Activa LT channels airflow noninvasively to a patient from a positive airway pressure device such as a continuous positive airway pressure (CPAP) or bilevel system. The Mirage Activa LT is: •...
Page 3
Parts of the Mask & Ordering Information Complete System Medium (M) 60148 Large (L) 60149 Large-Wide (LW) 60150 Frame assembly (no headgear, no cushion): 60175 Elbow assembly (elbow, swivel): 16399 Dial 61289 Mask frame 60180 Elbow 16387 Swivel 16565 *S Small St Standard Medium (M) Large (L)
Page 6
This mask should be reprocessed when used between patients. Cleaning, disinfection and sterilization instructions are available from the ResMed website, www.resmed.com/masks/sterilization/americas. If you do not have Internet access, please contact your ResMed representative. Storage Ensure that the mask is thoroughly clean and dry before storing it for any...
Troubleshooting Possible reason Mask is uncomfortable Headgear straps are too tight. Cushion incorrectly inflated. Mask is too noisy Cushion clip is not inserted correctly. Ports cap or elbow incorrectly inserted. Vents are blocked or partially blocked. Air leaking around the face Mask not positioned correctly.
Technical Specifications The mask system does not contain latex, PVC or DEHP materials. Pressure–Flow The mask contains passive venting to protect against rebreathing. Curve As a result of manufacturing variations, the vent flow rate may vary. Dead Space The dead space of the mask varies according to cushion size. It is 185 mL for the Medium size.
Limited Warranty ResMed warrants that your ResMed mask system, including its components: mask frame, cushion, headgear, tubing and other accessories (“Product”) shall be free from defects in material and workmanship for a period of ninety (90) days from the date of purchase by the initial consumer.