Entering Coordinates - Clarion NX807E Owner's Manual

3.1.7 Entering coordinates

To select a destination by entering its coordinates, perform the following steps:
1. Tap on the Navigation view to access the Navigation menu.
2. Tap and
3. You can enter the latitude and longitude values in any of the following formats: decimal
degrees, degrees and decimal minutes, or degrees, minutes and decimal seconds.
Tap
(optional) If necessary, tap
coordinate in UTM format.
Tip!
4. A full screen map appears with the selected point in the middle. If necessary, tap the
map somewhere else to modify the destination. The cursor (
location.
5. Check the settings for road types and change them if necessary.
Tap to enable or avoid motorways, tap
Per-use Toll, tap
44 NX807E English
.
.
then
for ferries, or tap
) appears at the new
for roads with Period Charge or
for carpool lanes.
and enter the