Regional Settings - Clarion NX807E Owner's Manual

Whenever adequate information is available, lane information similar to
the real ones on road signs above the road is displayed at the top of the
map. Tap it to turn this feature on or off.
If you are approaching a motorway exit or a complex intersection and
the needed information exists, the map is replaced with a 3D view of the
junction. Tap it to turn this feature on or let the map be displayed for the
whole route.
When entering tunnels, the surface roads and buildings can be
disturbing. Tap it to show a generic picture of a tunnel instead of the
map. A top-down overview of the tunnel and the remaining distance are
also displayed.
In certain situations, NX807E offers a detour when there is a traffic jam
on a highway. See page 65.
In certain situations, NX807E offers an alternative route when there is a
traffic jam on the road. See page 65.
In certain situations, NX807E offers parking Places when you approach
your destination. See page 66.
In certain situations, NX807E offers different route alternatives when
you leave the planned route and suddenly exit the motorway. See page
66.

4.3.5 Regional settings

You can modify the following settings:
Button
It displays the current written language of the user interface. Tap it to
select a new language from the list of available languages. The
application restarts after you change this setting and confirm it.
78 NX807E English
Description