4.
The Change Start to... screen appears. Select the starting point of the route the same
way you select a destination.
5.
You can see the new starting point on the map. Tap
Multipoint Route screen appears where you can continue adding a destination to your
route.
6.
Tap
marker (showing that there is no GPS reception). If a planned route already exists, it is
now recalculated starting from the selected location.
7.
To return to normal navigation, tap
3.4.2 Adding an additional destination
If you already have a planned route and you select a new destination as described in the
above sections, the route to the previous destination is deleted and a new route is calculated.
To add a new intermediate destination to the planned route, perform one of the following
actions:
•
Tap the map anywhere to browse it. After selecting the location on the map, tap
and
destination. The other destinations of the route remain intact.
•
Tap
on the Navigation view and tap
as described on page 46.
to continue. The map returns with a transparent position
to add the selected location to your route as an intermediate
and the
.
. Add a destination to your route
NX807E English 51