Entering A Number To Make A Call; Making Calls From The Outgoing/Incoming; Call Log - Clarion NX505E Owner's Manual

Pressing NAVI AV during a telephone call
switches the screen as follows. With this
screen displayed as it is, operations such as
searching for a destination can be performed.
Map screen during a telephone call
The call is disconnected and the current
position is displayed.
The call time, name of
other party or telephone
number is displayed.
This switches to telephone calls on the
cellphone unit.
This toggles the telephone control bar
between display and hide.
If you use the call waiting service, the
following screen is displayed when you
receive an incoming call from a third party
during a telephone call.
Screen during a telephone call (the second
incoming call waiting)
:
This ignores the call from a third party
and continues the call from the first
incoming call.
:
Every time you touch, this switches the
call between the first incoming call and
the second incoming call.
The other call is put on hold.
:
This ends the current call, and answers
the second incoming call.
Notice
• and are operatable on the map
screen during a telephone call.
MEMO:
• With some cellphone models, incoming
calls are automatically rejected when
there is an incoming call from a third party
during a telephone call. The incoming call
log is not saved.
• When the vehicle moves outside the
cellphone service area during a telephone
call (i.e.to an area where radio waves
cannot be received), the line will be
disconnected.
• During hands free telephone calls, the
audio source cannot be switched or
selected.
• It may not be possible to make or receive
calls unless the cellphone is in standby.
Entering a number to make a
call
Attention
• While you are driving, you cannot enter
telephone numbers to make a call. Always
stop at a safe location before making a
telephone call.
Notice
• Always input the area code when calling a
land-line phone.
• With some cellphones, you may not be
able to redial immediately after hanging
up a call you dialed. Wait a while before
dialing the number again.
1
MENU
Phone
2
Enter the telephone number.
3
The telephone number is dialed and
the other party is called.
:
The call is stopped if this is
touched while you are calling the
other party.
4
To end a telephone call
This disconnects the call and returns
you to the screen before you made
the call.
The telephone number you called,
name (when registered to the
phonebook) and dial date/time are
saved as the outgoing call log. Only
the latest call log is shown for the
same phone numbers.
Making calls from the outgoing/
incoming call log
Notice
• You cannot make calls from the incoming
call log when the incoming call was from a
withheld number.
1
MENU Phone
2
3
or
4
Select the other party you want
to dial.
5
Call
The registered telephone number is
dialed and the call is made.
MEMO:
• The latest ten calls recorded on the unit
are displayed in the incoming/outgoing

call log.

• In the case of telephone numbers
registered to the phonebook, the
registered names are displayed.
NX505E 29