Table of Contents
Advertisement
2.5.2 Group Sewing (Cyclic Sewing)
2.5.2 Group Sewing (Cyclic Sewing)
This machine can be used to sew several patterns in order cyclically.
Up to 99 patterns can be inputted. In addition, 99 data of group sewing can be registered. If necessary, please make
a copy for future use.
(1) Cyclic Data Selection
1)
Set as input mode
Under input mode, when sewing LED is off, select
cyclic sewing data. If the system is under sewing
mode, press
key to change into input mode.
The cyclic sewing data can only be selected under
data mode.
2)
Select cyclic sewing data
Press
key to shift among the registered
cyclic sewing data No. and continuous sewing
data No. At this time, user can select the intended
cyclic sewing No.
3)
Conduct sewing
After selecting the continuous sewing data, press
Only cyclic data No.1 is registered without sewing patterns and therefore cannot be used for sewing. Please
follow the following editing method to input patterns.
(2) Cyclic Sewing Data Editing Method
1)
Set as input mode
Under input mode, when sewing LED is off, user
can input continuous sewing data. If the machine is
under sewing mode, press
into input mode.
2)
Set cyclic sewing data as editing status
Press
key to enter editing status and the
selected pattern No. for editing will become
shadowed. At that time, data can be edited.
3)
Select editing content
Press
key to change the editing content and when user move to the last pattern, they can add patterns.
After selecting the editing content, press
be inserted.
key and sewing LED lights up, ready for sewing.
key to change
key to display the icon
75
– 20 –
which means pattern data can
Advertisement
Table of Contents
