Chevrolet Silverado EV 2024 Instruction Manual page 366

4. Remove the cap from the sealant
canister inlet valve (1) by turning it
counterclockwise. Attach the air only
hose (8) to the sealant canister inlet
valve (1) by turning it clockwise until
tight.
5. Remove the valve stem cap from the flat
tire by turning it counterclockwise.
6. Attach the sealant/air hose (2) to the tire
valve stem by turning it clockwise until
tight.
7. Plug the power plug (7) into the
accessory power outlet in the vehicle.
Unplug all items from other accessory
power outlets. See Power Outlets 0 99.
If the vehicle has an accessory power
outlet, do not use the cigarette lighter.
If the vehicle only has a cigarette lighter,
use the cigarette lighter.
Do not pinch the power plug cord in the
door or window.
Vehicle Care
8. Start the vehicle. The vehicle must be
running while using the air compressor.
9. Press the on/off button (4) to turn the
tire sealant and compressor kit on.
The compressor will inject sealant and air
into the tire.
The pressure gauge (6) will initially show
a high pressure while the compressor
pushes the sealant into the tire. Once
the sealant is completely dispersed into
the tire, the pressure will quickly drop
and start to rise again as the tire inflates
with air only.
10. Inflate the tire to the recommended
inflation pressure using the pressure
gauge (6). The recommended inflation
pressure can be found on the Tire and
Loading Information label. See Tire
Pressure 0 349.
The pressure gauge (6) may read higher
than the actual tire pressure while the
compressor is on. Turn the compressor
off to get an accurate pressure reading.
The compressor may be turned on/off
until the correct pressure is reached.
365