Specifications - Ryobi RLTGM25CS Operator's Manual

SPECIFICATIONS

Weight without fuel
and trimmer head
Weight without fuel
with trimmer head
Fuel tank volume
Cutting swath
Diameter of cutting line
Engine displacement
Maximum engine performance
(in accordance with ISO 8893)
Maximum rotational frequency of
the spindle
Engine speed (rotational
frequency) at recommended max.
spindle rotational frequency
Engine speed (rotational
frequency) at idle
Fuel consumption (in accordance
with ISO 8893) at max. engine
performance
Specific fuel consumption (in
accordance with ISO 8893) at
max. engine performance
Vibration level idling
Left handle
Right handle
Vibration level racing
Left handle
Right handle
Sound pressure level (in
accordance with EN ISO22868)
Sound power level (in accordance
with EN ISO22868)
DESCRIPTION
FIGURE 1
1. Upper shaft
2. Knob
3. Button
4. Guide recess
English (Original Instructions)
3.56 Kg
3.86 Kg
620 cm 3
432 mm
2.4 mm
25.4 cc
0.9 kW
10000 min
-1
12000 min
-1
2600-3200 min
-1
0.54 kg/h
0.50 kg/h
6.4 m/s
2
14.9 m/s
2
5.8 m/s
2
3.7 m/s
2
98 L (dBA)
PA
113 L (dBpA)
WA
4
5. Front handle
6. Safety guard
7. Trimmer line
8. Trimmer head
FIGURE 2
5. Front handle
9. Securing bolts
10. Bracket
FIGURE 3
11. Securing bolt
12. Flat washer
13. Lock washer
14. Wing nut
FIGURE 4
15. On/Off switch
16. Throttle lock out button
17. Throttle trigger
18. Primer bulb
19. Starter grip
FIGURE 8
26. Bump head cover
27. Bump knob
28. Line spool
29. Bump head spring
30. Bump head securing bolt
31. Cutting head housing
FIGURE 9
20. Foam air filter
21. Air filter cover
22. Cover securing knob
FIGURE 10
23. Spark plug boot
24. Spark plug
FIGURE 11
25. Spark arrestor
ASSEMBLY
ATTACHING THE POWER HEAD TO THE TRIMMER
ATTACHMENT (FIG. 1)
„ Follow these steps to connect the attachment to the
upper shaft (item 1).
„ Loosen the knob (item 2) by turning it counter
clockwise.
„ Align the button (item 3) on the attachment shaft with
the guide recess (item 4) on the upper shaft.
„ Slide the attachment shaft into the upper shaft until the
attachment shaft clicks into place.
„ Tighten the knob securely by turning it clockwise.
Removing the attachment from the upper shaft. Follow
these steps to remove the attachment from the upper
shaft.