Other Vessel Settings; Restoring The Original Chartplotter Factory Settings; Sharing And Managing User Data - Garmin ECHOMAP UHD Owner's Manual

Other Vessel Settings

When your compatible chartplotter is connected to an AIS device or VHF radio, you can set up how other
vessels are displayed on the chartplotter.
Select Settings > Other Vessels.
AIS: Enables and disables AIS signal reception.
DSC: Enables and disables digital selective calling (DSC).
AIS Alarm: Sets the collision alarm
Transmission Test Alerts,

Restoring the Original Chartplotter Factory Settings

NOTE: This affects all devices on the network.
1 Select Settings > System > System Information > Reset.
2 Select an option:
• To reset the device settings to the factory default values, select Reset Settings. This restores the default
configuration settings, but does not remove saved user data, maps, or software updates.
• To clear saved data, such as waypoints and routes, select Clear User Data. This does not affect maps or
software updates.
• To clear saved data and reset device settings to the factory default values, disconnect the chartplotter
from the Garmin Marine Network, and select Delete Data and Reset Settings. This does not affect maps
or software updates.
This feature allows you to import data from other devices that may have been generated by third parties.
Garmin makes no representations about the accuracy, completeness, or timeliness of data that is generated by
third parties. Any reliance on or use of such data is at your own risk.
You can share user data between compatible devices. User data includes waypoints, saved tracks, routes, and
boundaries.
• You can share and manage user data using a memory card. You must have a memory card installed in the
device. This device supports up to a 32 GB memory card, formatted to FAT32.
• You can share data if two compatible devices are connected using the blue and brown wires on the power
cable or using the User Data Sharing Cable

Sharing and Managing User Data

(Setting the Safe-Zone Collision Alarm, page 20
page 22).
Sharing and Managing User Data
WARNING
(Connecting to a Garmin Device to Share User Data,
and Enabling AIS
page 108).
107