Alignment - Siemens LDS 6 Operating Instructions Manual

3.3

Alignment

In addition to the standard sensor alignment kit used with the CD 6 sensors, two alignment
adaptors are provided. The adapter marked with a blue line is used to align the receiver
sensor.
Figure 3-5
Align the sensors in the following steps:
After switching off the sensor purging, remove the sensor purging tube at the transmitter
side:
Transmitter side
Figure 3-6
Sensor CD 6C Operating Instructions
Operating Instructions, 12/2007, A5E00912721-02
Blue line
CD 6C alignment kit
Removal of the sensor purging tube
Installation Guidelines
3.3 Alignment
17