Symbols In This Manual - Ryobi R36XSHR10 Manual

Do not use as a step.
Wait until all product
components have completely
stopped before touching them.
STOP
93 Guaranteed sound power level
When the product is off and
the chute is clear, press the
calibration button to begin
blade calibration.
Press to turn on the product
and press again to toggle
speeds.
Hold down the button to run
the product in reverse mode.
Regulatory Compliance
Mark (RCM). The product
meets applicable regulatory
requirements.
6
Original Instructions
Remove wheel axle, bin and plunger.
Lay shredder on the ground with the handles down.
Place the wheel
axle, bin and
plunger into
their storage
locations.
1. Remove the wheel axle, bin, and plunger.
2. Lay the product on the ground with the
handles down.
3. Press the metal frame release button
and fold up the legs until they lock into
place.
4. Place the wheel axle, bin, and plunger
into their storage locations.
5. Store the product in a cool, dry, and well-
ventilated area.
Waste electrical products
should not be disposed of
with household waste. Please
recycle where facilities exist.
Check with your local authority
or retailer for recycling advice.

SYMBOLS IN THIS MANUAL

Parts or accessories sold
separately
Note
Warning
Press leg release
buttons and fold legs up
until they lock into place.
Store the tool in
a cool, dry and
well-ventilated
area.