Principal Parts - JUKI HZL-X Series Service Manual

[3] Principal parts

Presser foot auto lift button
Needle up/down button
Thread trimming button
Presser foot pressure adjustment dial
Face cover
Threading lever
Speed controller
Presser foot lifting lever
Sensor pinhole for buttonholing
Thread cutter
Start/stop button
Auxiliary bed
(accessory case)
Drop feed knob
Hard case
Wide table
DX7 Only
Presser foot releasing button
Presser foot holder setscrew
Presser foot holder
Feed dog
Throat plate
Hook cover
* Do not put heavy ob-
jects onto hard case
and wide table.
* Do not remove the
styrene foam fitted
inside the hard case.
If it is removed, the
sewing machine can
be damaged when it
is placed in the hard
case or other prob-
lems can occur.
– 4 –
Hand wheel (pulley)
Power switch
Foot-controller-jack
Machine-socket-inlet
Thread tension
adjustment dial
Spool cap (large)
Spool pin
Bobbin winding
shaft
LCD Screen
Light under arm
DX7 Only
Operational
buttons
Lock stitch button
Reverse stitch
button
Knee lifting lever
hole
Needle setscrew
Needle
Presser foot
Straight stitch slide plate lever
Straight stitch slide plate
Hook cover release button