Table of Contents
Advertisement
6-22 Service mode
6-22-1 Service mode screen
Check with item numbers and items.
[How to select the service mode]
1. When the power switch stays off, keep pressing both the reverse feed button and the thread trimming button
simultaneously to turn ON the power switch.
2. The service mode screen appears on the display. Select the number corresponding to the service item to
operate.
* To select the number corresponding to a target service item, shift the item shown on the screen forward or
backward one after another by pressing the selection button
ing to the target item is selected.
6-22-2 Service-mode items and descriptions
No.
Item name
1
FEED 0 MODE
2
FAGOTT
3
DARNING
4
ZIG ZAG
5
KIKKOU
6
OVERCASTING
7
BLIND STITCH
Select the straight stitch pattern and set the amount of feed at 0 (zero).
Press the "OK" button to initialize the pattern to set the amount of feed to zero (0).
Select the fagoting pattern.
Set the zigzag width at 7.0 mm.
The fagoting pattern can be sewn.
Select the darning pattern.
Darning pattern can be sewn with the initial value.
Select the zigzag pattern.
Zigzag pattern can be sewn with the initial value.
Select the Kikkou pattern.
Kikkou pattern can be sewn with the initial value.
Adjust the needle entry point for overcasting.
Slide the needle entry points toward the needle throwing direction entirely by the
specified number of pulses.
The sliding amount can be adjusted with the "zigzag width adjusting" dial or but-
ton.
The adjustable range of the sliding amount is [-4 to 4]. Adjustment is made in
increments of 1.
Adjust the needle entry points on the left side of the blind stitch.
Slide the needle entry points toward the needle throwing direction entirely by the
specified number of pulses.
The sliding amount can be adjusted with the "zigzag width adjusting" dial or but-
ton.
The adjustable range of the sliding amount is [-4 to 4]. Adjustment is made in
increments of 1.
– 37 –
until the number correspond-
Description
Hide quick links:
Advertisement
Table of Contents
