Canon
F. Device Configuration Management
There are two tools to help a System Administrator manage device
configuration settings from device to device, and they are standard tools on
the
imageRUNNER
Configuration Manager) and Device Migration Navigator.
1.
DCM (Device Configuration Manager)
The DCM reduces the installation time for a new or replacement
imageRUNNER ADVANCE DX device by exporting the user modes and
service modes from the current device, and then importing them to a
new or replacement device.
The settings can be imported and exported from the current device via
the Remote UI or the Device Information Delivery Settings function, or
via the Service Mode to USB memory media. For more information on
the DCM, see the imageRUNNER ADVANCE DX C357iF Series Service
Manual.
2.
Device Migration Navigator
The Device Migration Navigator is an application that helps the service
technician select the best migration tool (Remote UI or USB memory
media) to transfer device settings based on the source device,
destination device, and the settings that need to be transferred.
The Device Migration Navigator delivers a printable report that shows
the service technician the tools to use, the migration procedure, and the
migration limitations. It is also available at no charge from Canon USA's
e-Support Website
Note: The Device Migration Navigator is only used to transfer device
settings. It is not used to back up or restore RAM data.
imageRUNNER ADVANCE DX C357iF Series Service Guide
Revision 8
imageRUNNER ADVANCE DX C357iF Series Service Guide
ADVANCE
DX
C357iF
Download Center.
Series:
DCM
(Device
March 2023
Page 53