Canon
4.
Network Port and Application Access Control
Network Port and Application Access Control enables System
Administrators to set up only the necessary protocols, such as IPP, FTP,
FTPS (UFP 3.10 and above), SNTP, SNMP, RAW, LPD, and others for
transferring data. These protocols can be enabled or disabled. The
System Administrator can also disable unneeded services, protocols,
ports, and the potential paths of attack so that attacks on the machine
can be minimized.
imageRUNNER ADVANCE DX C357iF Series Service Guide
Revision 8
imageRUNNER ADVANCE DX C357iF Series Service Guide
March 2023
Page 28