Canon imageRUNNER ADVANCE DX C357iF Series Service Manual page 57

Canon
c. Method C – On Demand Update
The On Demand Update method provides the service technician with
access to the most recent version of firmware on demand at the
device. The technician also has the ability to schedule firmware
installs. A service technician must visit the site every time the
firmware must be updated; however, the technician does not need to
maintain a library of firmware versions.
Notes:
• To use the CDS on an imageRUNNER ADVANCE DX, the device
• When using the Remote Update method, the service technician
• The CDS Instruction Manual includes conditions for use and
• The Content Delivery System Software Solutions Guide (available
imageRUNNER ADVANCE DX C357iF Series Service Guide
Revision 8
imageRUNNER ADVANCE DX C357iF Series Service Guide
must have access to the Internet. The service technician should
perform a communications test from the Service Mode of the device
to validate the device's ability to communicate to the CDS
Distribution Server.
must enable eRDS
imageRUNNER ADVANCE DX devices. In addition, the devices
must be registered on the UGW. For more information on
registering devices on the UGW, see the documentation that came
with imageWARE Remote.
acceptance of the CDS Service. It also contains language to help
the customer understand the conditions for use and acceptance of
the third-party software that is embedded in the hardware. (These
conditions are also addressed in the Limited Warranty for
Embedded Software.)
on Canon USA's Partner Portal and e-Support Websites), contains
additional language that Canon USA recommends your dealership
include in the Maintenance Agreement with your customers as it
pertains to the use of the CDS service.
and the CDS UGW switch on all
March 2023
Page 50