Audio Technica ATUC-M58H Instruction Manual page 46

Digital wired conference system, gooseneck microphone with led ring, discussion unit, interpretation unit, control unit, integration unit, link extender, voting unit, ir discussion unit, hybrid control unit, hybrid control unit dante-enabled, ir transmitt
Hide thumbs Also See for ATUC-M58H:
Table of Contents

Advertisement

When Priority Is On
Talk Mode
Left Button*
Cut/Mute
All Button Toggle
Push to Talk
Permit Next
Cut/Mute
Voice
Permit Next
* Depends on the "Left Button Function Assign" setting.
(talk) LED
⑦ Cut/mute LED
⑧ </> monitor channel selection buttons
W hile you use these buttons, the currently selected monitor
channel appears on the display.
• FL: Audio from floor channel
• 01 - 03: Audio from groups 1 to 3.
⑨ Display
W hen changing the monitor channel or adjusting the volume
level, the currently set value is displayed.
⑩ Power LED
The dot on the far right is always lit while the power is on.
⑪ Infrared transmitter
⑫ Rear LED
Indicates the talking state and the remaining charge in the
battery.
• W hile talking: lit
• W hile requesting to talk: blinks
• Talking off: off (can be changed to dimmer)
• Battery low: blinks orange
• The LEDs can change to 9 colors.
⑬ Headphone jack
Speech from the selected monitor channel is output.
⑭ –/+ Headphone volume adjustment buttons
W hen operating these buttons, the current volume level (0 to
20) is shown on the display.
⑮ Power switch
⑯ AC adapter jack
⑰ Rechargeable battery/rechargeable battery cover
release button
⑱ Service jack
Right Button
Talk ON
Talk ON
Self Mute
Self Mute
46

Advertisement

Table of Contents
loading

Table of Contents