Audio Technica ATUC-M58H Instruction Manual page 10

⑫ Jog dial/ENTER button
Rotate the jog dial to select the desired item and then press the
ENTER button to confirm.
Rotating the jog dial also adjusts the setting values.
• Locking the operation buttons (Key Lock function)
Press the BACK button and ENTER button simultaneously for
over 2 seconds to activate the Key lock function, and thus lock
all front panel operations except for the Power switch.
• Unlocking the operation buttons
W hen the operation buttons are locked, press the BACK
button and ENTER button simultaneously for over 2 seconds
to unlock the operation buttons.
Display and jog dial operations:
HOME screen
1 2
The item with ▶ ◀ is the currently selected item.
By rotating the jog dial, move ▶ ◀ to select the operation you
want to perform and then press the ENTER button.
1 Master level adjustment (Lvl)
Master level
-50 -40 -30 -20 -12 -6 0 6 12
• Rotate the jog dial to adjust the CU output level (OUTPUT 1).
• W hile pressing the ENTER button, rotate the jog dial to adjust
the level in 10-step increments.
• Be sure that the Peak indicator does not light up while
adjusting the level.
2
Recording operations (Rec)
R (Remaining recording time)/ E (Elapsed recording time) display
-50 -40 -30 -20 -12 -6 0 6 12
• Rotate the jog dial to select Rec (Start recording)/
Pau (Pause)/ Stp (Stop)/ R or E (Recording time display) and
then press the ENTER button to confirm.
• Select the time display on the top right side of the screen using
the jog dial and then press the ENTER button to switch the
display between R (Remaining recording time)/ E (Elapsed
recording time).
• To adjust the recording level, move ▶ ◀ to the recording level
meter at the top left of the screen to display Rec Lvl and then
press the ENTER button to enter recording level adjustment
mode. Rotate the dial to adjust the recording level being sure
that the Peak indicator does not light up.
• W hile pressing the ENTER button, rotate the jog dial to adjust
the level in 10-step increments.
3 4
Peak (dBu)
Peak (dBu)
3 Conference preparation (Pst)
• [1] Recall Presets : Rotate the jog dial to move ">" to the item
you want to recall and then press the ENTER button to
confirm.
• [2] Conf. Setup : Change or check the conference settings.
Rotate the jog dial to move ">" to the item you want to change
or check and then press the ENTER button to confirm.
Pst Menu Items:
Settings can also be configured via Web Remote. The item
names in parentheses ( ) are used for Web Remote.
[1] Recall Presets
[2] Conf. Setup
01 Conference Mode (Conference Mode)
02 NOM (Number of Open Mics)
03 Auto Mic Off (Auto Mic OFF)
04 Override Mode (Override Mode)
05 Max Queue (Maximum in Queue)
06 MicON Trigger (Mic ON Trigger / Mic ON Trigger for
Priority)
07 MicON Hold Time (Mic ON Hold Time)
08 Interrupt Option (Interrupt Option)
• Items that can be configured from [2] Conf. Setup differ
depending on the conference mode.
• For details on items, see "Menu items" in the Web
Remote Manual.
4 Configuring settings (Set)
Rotate the jog dial to move ">" to the desired item or value and
then press the ENTER button to confirm.
For details on setting items, see "Set Menu Items" (
10
➤
page 23).