Gigabyte GA-F2A88X-UP4 User Manual page 62

Select a caching mode. Options include Read/Write, Read Only, and None. Then press <Enter> to proceed.
Read and Write-back Caching. (Some data may be lost in a crash)
Arrays
Create Array
Disks: 0, 1
Type: RAID 0
Total Size: 158GB
Cachin Mode: Read/Write
User Input
Select Caching Mode
Read/Write
Read Only
None
Finally, a message which says "Confirm Creation of Array" will appear. Press <C> to confirm or <Esc> to return
to the previous screen. When completed, you will see the new array on the main screen (Figure 13). To exit the
RAID BIOS utility, press <Esc> and then press <C> to confirm.
Creates an array from the connected disks
Arrays
1---RAID0, 158GB, Normal(R/W)
Main Menu
Initialize Disk(s)
Create Array
Delete Array(s)
Swap Two Arrays
Manage Hot Spare(s)
View Disk Details
View Array Details
Rescan All Channels
Controller Options
Continue to Boot
License Level: 50
Configuring SATA Hard Drive(s)
AMD-RAID Array Configuration (Build: 6.1.1-00075)
0-00, 79GB, Ready
1-01, 79GB, Ready
<h><i><f><g>=Choose, <Esc>=Back
<Enter>=Select Menu Item
Figure 12
AMD-RAID Array Configuration (Build: 6.1.1-00075)
0-00, 79GB, Online
1-01, 79GB, Online
<h><i><f><g>=Choose, <Esc>=Back
<Enter>=Select Menu Item
Figure 13
- 62 -
Available Keys
Disks
Available Keys
Available Keys