Gigabyte GA-F2A88X-UP4 User Manual page 44

& CPU Vcore/Dram Voltage/+3.3V/+5V/+12V
Displays the current system voltages.
& CPU/System Temperature
Displays current CPU/system temperature.
& CPU/System Fan Speed
Displays current CPU/system fan speeds.
& CPU Warning Temperature
Sets the warning threshold for CPU temperature. When temperature exceeds the threshold, BIOS will emit
warning sound. Options are: Disabled (default), 60
& CPU/System Fan Fail Warning
Allows the system to emit warning sound if the CPU fan or system fan are not connected or fail. Check the
fan condition or fan connection when this occurs. (Default: Disabled)
& CPU Fan Speed Control
Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
A llows the fan to run at different speeds according to the CPU temperature. You can adjust
Normal
the fan speed with EasyTune based on your system requirements. (Default)
Allows the fan to run at slow speeds.
Silent
Allows you to control the fan speed under the Slope PWM item.
Manual
Allows the fan to run at full speeds.
Disabled
& Slope PWM
Allows you to control the CPU fan speed. This item is configurable only when CPU Fan Speed Control is
set to Manual. Options are: 0.75 PWM value /
& 1st System Fan Speed Control (SYS_FAN1 Connector)
Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
A llows the fan to run at different speeds according to the system temperature. You can adjust
Normal
the fan speed with EasyTune based on your system requirements. (Default)
Allows the fan to run at slow speeds.
Silent
Allows you to control the fan speed under the Slope PWM item.
Manual
Allows the fan to run at full speeds.
Disabled
& Slope PWM
Allows you to control the system fan speed. This item is configurable only when 1st System Fan Speed
Control is set to Manual. Options are: 0.75 PWM value /
& 2nd System Fan Speed Control (SYS_FAN2 Connector)
Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
A llows the fan to run at different speeds according to the system temperature. You can adjust
Normal
the fan speed with EasyTune based on your system requirements. (Default)
Allows the fan to run at slow speeds.
Silent
Allows you to control the fan speed under the Slope PWM item.
Manual
Allows the fan to run at full speeds.
Disabled
& Slope PWM
Allows you to control the system fan speed. This item is configurable only when 2nd System Fan Speed
Control is set to Manual. Options are: 0.75 PWM value /
BIOS Setup
C/140 F, 70 C/158 F, 80
o o o o o
C ~ 2.50 PWM value / C.
o o
C ~ 2.50 PWM value /
o
C ~ 2.50 PWM value /
o
- 44 -
C/176 F, 90 C/194 F.
o o o
C.
o
C.
o