AEG L6TBG721 User Manual page 20

20 www.aeg.com
The drain pump can operate
for a short time when the
appliance fills water.
10.7 Cycle time recalculation
After approximately 15
minutes from the start of the
programme:
• The appliance adjusts
• The display shows the
10.8 Starting a programme
with the delay start
1. Press button Inicio Diferido again
and again until the display shows the
number of minutes or hours of delay.
The related indicator comes on.
2. Press button Inicio/Pausa.
The appliance starts the countdown of
the delay start.
When the countdown is completed, the
programme starts automatically.
Before you press button
Inicio/Pausa to start the
appliance, you can cancel or
change the set of the delay
start.
10.9 Cancelling the delay start
To cancel the delay start:
1. Press button Inicio/Pausa to set the
appliance to pause.
The related indicator flashes.
2. Press button Inicio Diferido
repeatedly until the display shows .
3. Press button Inicio/Pausa again to
start the programme immediately.
automatically the cycle
time to the laundry you
have put in the drum to
have perfect washing
results in the minimum
necessary time.
new time value.
10.10 Interrupting a
programme and changing a
option
You can change only some options
before they operate.
1. Press button Inicio/Pausa.
The related indicator flashes.
2. Change the option set.
3. Press the button Inicio/Pausa again.
The programme continues.
10.11 Cancelling a running
programme
1. Press button On/Off to cancel the
programme and to deactivate the
appliance.
2. Press button On/Off again to activate
the appliance.
Now, you can set a new washing
programme.
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.
10.12 The ProSense load
detection
After touching the Inicio/Pausa button:
1. The indicator
2. The ProSense starts the laundry load
detection to calculate the real
programme duration. The indicator
and the time dots flash.
3. After about 15 minutes the display
shows the new programme duration:
the indicator
time dots stops flashing.
The appliance adjusts automatically
the programme duration to the load
to achieve perfect washing results in
the minimum possible time. The
programme duration could increase
or decrease.
flashes.
goes off and the