Table of Contents
Advertisement
10.4 Liquid or powder
detergent
CLICK
1.
3.
• Position A for powder detergent (factory setting).
• Position B for liquid detergent.
When you use the liquid detergent:
• Do not use gelatinous or thick liquid detergents.
• Do not put more liquid then the maximum level.
10.5 Setting a programme
1. Turn the programme knob and set
the programme:
• The related programme indicator
comes on.
• The indicator of Inicio/Pausa
flashes.
• The display shows: the default
temperature, the spin speed, the
indicators of the programme
phases and the programme
duration.
2. If necessary, change the
temperature, the spin speed, the
cycle duration, or add available
options. When you activate an
option, the indicator of the set
option comes on.
2.
CLICK
4.
10.6 Starting a programme
without the delay start
Press button Inicio/Pausa to start the
programme.
The relevant indicator stops to flash and
stays on.
On the display the indicator of the phase
is operation starts to flash.
The programme starts, the lid is locked.
The display show the indicator
A
In case a selection is not
possible , no indicator
comes on and an acoustic
signal sounds.
ENGLISH
19
B
.
Advertisement
Table of Contents
