Canon imageCLASS X LBP1238 II Service Manual page 193

COPIER (Service mode for printer) > OPTION (Specification setting mode) > BODY
NS-LGN
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
SLPMODE
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
SDTM-DSP
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Additional Functions
Mode
RMT-SW
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Restriction on the use of LOGIN authentication at SMTP authentication
To restrict use of LOGIN authentication at the time of SMTP authentication.
Upon user's request
1) Enter the setting value, and then press Apply key.
2) Turn OFF/ON the main power switch.
0 to 1
0: SMTP server-dependent
1: Not used
0
SMTP authentication: Protocol in which user authentication function is added to SMTP, which is
the protocol to be used for e-mail transmission. At the time of e-mail transmission, this protocol
executes authentication of the user account and the password between the SMTP server and the
user to approve e-mail transmission only when it's authenticated.
Setting of shift to sleep mode
To restrict shift to sleep mode.
When 1 is set, the machine does not shift to sleep mode.
When sleep failure occurs
1) Enter the setting value, and then press Apply key.
2) Turn OFF/ON the main power switch.
When 1 is set, the shift to the sleep mode except the mode (that is the Energy saver mode) that
the operation panel becomes off is prohibited. When the Auto Sleep time has passed, the mchine
shift to the energy saver mode that the operation panel becomes off.
The machine cannot prohibit the shift to the mode that the operation panel becomes off.
0 to 1
0 : Shift is available.
1 : Shift is not available.
0
ON/OFF of Auto Shutdown Time display
To set whether to display [Auto Shutdown Time] in [Menu].
The setting is enabled only for the model with automatic shutdown function.
When switching to display or hide the items related to auto shutdown
Enter the setting value, and then press Apply key.
For the model without automatic shutdown function, the setting is disabled even if it is configured.
0 to 1
0: OFF
1: ON
Preferences> Timer/Energy Settings> Auto Shutdown Time
ON/OFF of remote UI service mode
To set whether to allow using service mode on remote UI.
When using service mode on remote UI
1) Enter the setting value, and then press Apply key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
0
183
9. Service Mode