Canon imageCLASS X LBP1238 II Service Manual page 178

COPIER (Service mode for printer) > ADJUST (Adjustment mode) > FEED-ADJ
ADJ-C2XR
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Unit
Default Value
Related Service Mode
Additional Functions
Mode
■ PANEL
COPIER (Service mode for printer) > ADJUST (Adjustment mode) > PANEL
TOUCHCHK
Detail
Use Case
Adj/Set/Operate Method
Related Service Mode
TOUCH-R
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
■ VIFADJ
COPIER (Service mode for printer) > ADJUST (Adjustment mode) > VIFADJ
DEV-HV-K
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Adjustment of write start position in horizontal scanning direction at Cassette 2 pickup (1st
side of 2-sided print)
To adjust the write start position in the horizontal scanning direction for the image on the 2nd side
at the time of pickup from the Cassette 2.
As the value is changed by 1, the left margin is changed by 0.001 mm.
+: Left margin becomes larger. (An image moves to the right.)
-: Left margin becomes smaller. (An image moves to the left.)
When replacing the DC Controller PCB/clearing RAM data, enter the value of service label.
The setting is applied to the 1st side at 2-sided print.
When replacing the DC Controller PCB/clearing RAM data
Enter the setting value (switch negative/positive by +/- key) and press Apply key.
This setting is linked with the setting of [Adjust Print Position] in [Settings/Registration].
The setting value is not cleared even if COPIER> FUNCTION> CLEAR> SRVC-DAT is executed.
-5080 to 5080
0.001 mm
0
COPIER > FUNCTION > CLEAR > SRVC-DAT
Adjustment/Maintenance > Adjust Image Quality > Adjust Print Position
Adjustment of Touch Panel coordinate position
To adjust the coordinate position on the Touch Panel of the Control Panel.
By making adjustment, the setting of TOUCH-R becomes 1.
When replacing the LCD Panel
1) Select the item, and then press Yes key.
2) Press the nine "+" keys in sequence.
COPIER > ADJUST > PANEL > TOUCH-R
Result of Touch Panel coordinate position adjustment
To set whether adjustment of the coordinate position on the Touch Panel of the Control Panel is
completed.
When adjustment with TOUCHCHK is completed, the setting of this item becomes 1.
When replacing the LCD Panel
Enter the setting value, and then press Apply key.
0 to 1
0: Not completed
1: Completed
0
COPIER > ADJUST > PANEL > TOUCHCHK
Adjustment of developing bias setting value (Bk)
To adjust the setting value of Bk-color developing bias.
When an image failure occurs
Enter the setting value (switch negative/positive by +/- key), and then press Apply key.
-5 to 5
0
COPIER > ADJUST > VIFADJ > DEV-HV-Y/M/C
168
9. Service Mode