Version Upgrade Using Usb Memory Storage Device - Canon imageRUNNER ADVANCE System V3.13 Service Manual

4. Select the DCON version to be downloaded and click the "Start" button.
Multiple files of system software can be selected in this step. Selecting SYSTEM automatically selects the language software
that supports the selected system.
NOTE:
Download is confirmed in any of the following 2 modes:
• Downloading of the difference only:
If the version does not exist in the host machine, download is executed.
If the same version exists, download is not executed.
• Overwrite all versions
Regardless of version upgrade or downgrade, all versions of the system software are downloaded without the confirmation
message.
"Downloading of the difference only" can be selected when the checkbox for SYSTEM is selected. There is no choice but to select
"Overwrite all versions" when the checkbox for SYSTEM is not selected.
NOTE:
Once download is started, the process up to the writing process is automatically executed. You cannot interrupt or add the process
in the middle of the operation. The following confirmation message is displayed when downloading is executed.
5. When download is completed, click the [OK] button.
This machine is automatically restarted.
6. Enter service mode to check the version.

Version Upgrade using USB Memory Storage Device

■ Connection
1. Obtain a corresponding firmware (ZIP file) and unzip it.
2. "Common Preparations (Preparing a USB Flash Drive)" on page
a USB Flash Drive)" on page
3. Disconnect the network cable if there is any connected to the machine.
38, save the unzipped firmware folder to a USB flash drive.
76
4. Firmware Management
38Referring to "Common Preparations (Preparing