HP ProLiant DL170h G6 Software Configuration Manual page 9

Table 3
Boot Settings Configuration submenu fields
Field Description
Do not display any splash screen during POST. For HP OEM business.
NUMLOCK Set this value to allow the Number Lock on the keyboard to be enabled
automatically when the computer system is boot up. This allows the
immediate use of 10-keys numeric keypad located on the right side of the
keyboard. To confirm this, the Number Lock LED light on the keyboard
Will be lit. This is the default setting.
This option does not enable the keyboard Number Lock automatically. To
use the 10-keys on the keyboard, press the Number Lock key located on
the upper left-hand corner of the 10-key pad. The Number Lock LED on
the keyboard will light up when the Number Lock is engaged.
Restore after AC Set this value to restore previous power state before loss occurred. The
Power Loss setting default value is Last State.
Set this value to always boot when AC power is restored.
Set this value to keep power off until the power button is pressed.
POST F1 Prompt Set this value to allow wait up to 15 seconds for press F1. The setting
default value is Delayed.
Set this value to allow waiting indefinitely for press F1.
Set this value. Do not wait for F1. Continue booting.
Options
Disabled
Enabled
Disabled
Last State
On
Off
Delayed
Enabled
Disabled
System BIOS configuration 9