HP ProLiant DL170h G6 Software Configuration Manual page 19

Table 11
SEL Configuration submenu fields
Field
View BMC System
Event Log
Clear BMC System
Event Log
Figure 14 Serial Port Configuration submenu
Table 12
Serial Port Configuration submenu fields
Field
Serial Port
Assignment
Serial Port Switching
Serial Port
Connection Mode
Description
The option specifies BMC system event log. Select this option and press <Enter> to
access the submenu to view the contents of System Event log.
The option specifies clear system event log. If the BMC Event log is full, you can choose
this item to clear out the BMC Event log. If this option is selected, a confirmation prompt
will appear before the log is cleared.
Description
This setting will assign the serial port connector to the system. The
setting default value is System.
This setting will assign the serial port connector to the BMC (Baseboard
management controller).
This setting allows the Serial port switch between system and BMC.
This setting will prevent the Serial port from switching between system
and BMC. The setting default value is Disabled.
Serial port connection mode is Direct. The setting default value is
Direct.
Serial port connection mode is Modem.
Options
System
BMC
Enabled
Disabled
Direct
Modem
System BIOS configuration 19