HP ProLiant DL170h G6 Software Configuration Manual page 21

Figure 16 Watchdog Configuration submenu
Table 14
Watchdog Configuration submenu fields
Field Description
IPMI Watchdog Set this value to allow BMC to reset if the operating system crashes
Timer Action or hangs. This is the default setting.
Disabled the item will not allow to crashes or hangs if OS crashes
or hangs.
Set this value to allow BMC to power down if the operating system
crashes or hangs.
Set this value to allow BMC to power cycle if the operating system
crashes or hangs.
IPMI Watch Dog Sets a 5 minute timeout value for BMC to wait before assuming the
Time Out system has crashed and needs to reset.
Sets a10 minute timeout value for BMC to wait before assuming
the system has crashed and needs to reset. The setting default
value is 10 minutes. This is the default setting.
Sets a 15 minute timeout value for BMC to wait before assuming
the system has crashed and needs to reset.
Sets a 20 minute timeout value for BMC to wait before assuming
the system has crashed and needs to reset.
Sets a 30 minute timeout value for BMC to wait before assuming
the system has crashed and needs to reset.
Options
Reset System
Disabled
Power Down
Power Cycle
5 Min
10 Min
15 Min
20 Min
30 Min
System BIOS configuration 21