HP ProLiant DL170h G6 Software Configuration Manual page 28

Table 19
Power Configuration submenu fields
Filed
Turbo Mode
NOTE: Turbo Mode is currently only available on certain high-bin Intel processors. It improves performance with
a minor penalty to power efficiency. It requires that Intel Enhanced SpeedStep also be Enabled.
Boot Menu
Figure 23 Boot Menu
Table 20
Boot menu fields
Filed
USB Device Boot
Priority
Embedded NIC
Port 1 PXE
Description
Prevent processor cores to run faster than marked frequency in
specific condition. When power efficiency mode is efficiency, the
value is disabled.
Allows processor cores to run faster than marked frequency in specific
condition. When performance mode is performance, the value is
enabled.
Description
Newly inserted USB devices from automatically showing up as top priority
within their device class in the standard boot order list. The default value is
High.
Disallow newly inserted USB devices from automatically showing up as top
priority within their device class in the standard boot order list. This is needed so
that the user can configure the BIOS to avoid attempting to boot non-bootable
USB devices that are left plugged into the server during POST.
Set this value not to allow boot from network.
Set this value to allow boot from network, default.
Options
Disabled
Enabled
Options
High
Low
Disabled
Enabled
System BIOS configuration 28