Wireless Remote Control - Carrier 40MBFAQ Owner's Manual

40MBFAQ: Owner's Manual

WIRELESS REMOTE CONTROL

Before you begin using your new air conditioner, familiarize yourself with the remote control.
Turns the unit on or off.
Increases temperature in
1°F (0.5°C) increments.
Max. temperature is
86°F (30°C).
NOTE: Press together
buttons at the same time
for 3 seconds alternates
the temperature display
between the °F and °C.
Scrolls through operation
functions as follows:
Active clean(
Fresh(
Follow Me(
( )
Active
The selected symbol flashes
on the display area, press
OK to confirm.
Decreases temperature
in 1 F°(0.5° C) increments.
Min. temperature is
O O
60 F(16 C).
Selects fan speeds in the
following order: AU 20%
40%
Press the TEMP
to increase/decrease the fan
speed in 1% increments.
Starts and stops the horizontal
louver movement. Hold down
for 2 seconds to initiate vertical
louver auto swing feature.
NOTE: New remote controller starting on production of week 10 year 2021 (serial number 1021V17181). For advanced functions, refer to the
RG10B(B1)/BGEFU1 Wireless Remote Controller's Service Manual.
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
ON/OFF
TEMP
&
SET
)
)
Sleep( )
) AP mode
clean( )
.......
TEMP
Boost
FAN SPEED
60% 80% 100%.
or button
SWING
Fig. 2 — Remote Controller Function Buttons
MODE
Scrolls through operation modes
as follows: AUTO
DRY HEAT
BREEZE AWAY
This feature avoids direct air flow
blowing on the skin
OK
Use to confirm the selected functions.
TIMER
Set timer to turn unit on or off
ECO/GEAR
Press to enter the energy efficient
mode in the following sequence:
ECO GEAR(75%)
GEAR(50%)
mode ECO
HUMIDITY
Adjust the room humidity during the
Dry mode in a range of 35%~85%.
Press to increase the humidity in
5% increments.
NOTE: After setting, the humidity
settings appear on the screen.
Humidity
NOTE: If the floor console is
matched with a multi zone outdoor
unit or if a wired controller is used,
the humidity sensor is not active.
LED
Turns indoor unit's LED display
and air conditioner buzzer on
and off, which creates a comfortable
and quiet environment.
BOOST
Enables unit to reach preset
temperature in shortest possible time.
4
COOL
FAN
Previous setting