Motherboard Installation; Tools Needed; Location Of Mounting Holes - Supermicro H13SRD-F User Manual

Super H13SRD-F User's Manual

2.3 Motherboard Installation

All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.

Tools Needed

Phillips
Screwdriver
(1)

Location of Mounting Holes

Note 1: To avoid damaging the motherboard and its components, do not use a force
greater than 8 lbf-in on each mounting screw during motherboard installation.
Note 2: Some components are very close to the mounting holes. Take precautionary
measures to avoid damaging these components when installing the motherboard to
the chassis.
Phillips Screws
(10)
JKVM1
USB2
MH1 MH2
SW1
(3.2 Gen2)
MH3
SRW2
MH8
JTPM1
MAC CODE
SRW1
LEDM1
JVRM1
JWD1
JPO1
BMC
JBM1
CPLD
MH4
JPT1
BT1
JMD1
H13SRD-F
M.2-C PCIe 5.0 x2
REV:1.00
SGPIO1
MH5
DESIGNED IN USA
JBT1
APU
BIOS
LICENSE
MH6 JSS1 MH7
SAS1
SAS2
JPWR1
MH9
J12
PRESS FIT
28
Standoffs (10)
Only if Needed