Frequently Asked Questions - Supermicro H13SRD-F User Manual

Super H13SRD-F User's Manual

3.3 Frequently Asked Questions

Question: What type of memory does my motherboard support?
Answer: The motherboard supports up to 128GB of ECC and Non-ECC DDR5 UDIMM
memory with speeds of up to 5200 MT/s in two DIMM slots or 3600 MT/s in four DIMM slots.
To enhance memory performance, do not mix memory modules of different speeds and sizes.
Follow all memory installation instructions given on Section 2-4 in Chapter 2.
Question: How do I update my BIOS?
Answer: It is recommended that you do not upgrade your BIOS if you are not experiencing
any problems with your system. Updated BIOS files are located on our website at
supermicro.com/ResourceApps/BIOS_IPMI_Intel.html.
and the information on how to update your BIOS on our website. Select your motherboard
model and download the BIOS file to your computer. Also, check the current BIOS revision
to make sure that it is newer than your BIOS before downloading. You can choose from the
zip file and the .exe file. If you choose the zip BIOS file, unzip the BIOS file onto a bootable
USB device. Run the batch file using the format FLASH.BAT filename.rom from your bootable
USB device to flash the BIOS. Then, your system will automatically reboot.
Warning: Do not shut down or reset the system while updating the BIOS to prevent possible
system boot failure!
Note: The SPI BIOS chip used on this motherboard cannot be removed. Send your
motherboard back to our RMA Department at Supermicro for repair. For BIOS Recov-
ery instructions, refer to the AMI BIOS Recovery Instructions posted at
supermicro.com/support/manuals/.
Check our BIOS warning message
52
http://www.
http://www.