Panasonic SL-DT100GCS Service Manual page 8

Item Player mode and
button
combination
CD laser In STOP mode,
drive press "STOP"
current button on the
measure- / player and "3"
ment button on the
remote control
unit.
User / In STOP mode,
initialization press / "STOP"
button on the /
player and
" " /
button on the
remote / control
unit.
Region In STOP mode,
display press "STOP"
button on the
player and "6"
button on the
remote control
unit.
Function
CD laser drive current
measurement / CD laser
drive current is measured
and the result is displayed
together with the initial value
stored in EEPROM. After the
measurement, CD laser
emission is kept on. It
isturned off when Standby/
on key is switched off. (It is
also turned off when the
primary power is switched
off.)
User initialization / User
setting are cancelled and
player is initialized to factory
setting.
Region display
Display
LDC _028 _026 / : CD
*1 *2 *3 *1
laser current measurement
mode / : Initial current stored
*2
in EEPROM / *3 :Measured
current
The value denotes the current
in decimal notation.
The above example shows the
initial current is 28 mA and the
measured value is 26 mA.
"INITIALIZED"
x *1 _yy *2 _zzz *3 / *1 : Region No.
/ *2 : Video output format / NN;
NTSC / PN; PAL (When playing
NTSC disc:NTSC) / P6;PAL
(When playing NTSC disc:
PAL60) / : Model setting code
*3
Cancellation
method
Cancelled
automatically
5 seconds
later.
Cancelled
automatically
5 seconds
later.