Table of Contents
Advertisement
Error
Error Content
Code
F701
Message
command / does
not end
F702
Message
command /
changes
F880
Task number is
not / appropriate
F890
Sending message
when message is
being sent to AV
task
F891
Message could
not be / sent to
AV task
F893
FROM falsification
F894
EEPROM
abnormality
F8A0
Message
command is / not
appropriate
5.4. Self-diagnosis function for the part of loading mechanism
5.4.1. How to display
1. Turn on the power.
2. Press "SELECT" button to select DVD.
3. With no disc on the unit, hold down "STOP" button for at least 2
seconds, and then press "
4. A loading mechanism error code is displayed if any. Refer to Table
5-1. If there are multiple error, they can be successively by
pressing "STOP" button.
5.4.2. Canceling self-diagnosis function
- Press the Standby/on button to turn off. And then press the Standby
Additional error explanation
Next message is sent before replying
to disc / manager
Message is changed before it is sent
as a reply to disc manager
Message coming from a non-existing
task
(Stop the operation by error, need to
correct / firmware bug)
Sending message to AV task
(Stop the operation by error, need to
correct / firmware bug)
Begin sending message to AV task
(Stop the operation by error, need to
correct / firmware bug)
Begin sending message to AV task
(Stop the operation by error, need to
correct / firmware bug)
" button for at least 2 seconds.
10
Defect 1 Defect 2 Defect 3
Firmware
bug
Firmware
bug
Firmware
bug
Firmware
bug
Firmware
bug
FROM
CPU
EEPROM Serial /
communi
- /
cation
line
Firmware
bug
Advertisement
Table of Contents
