Table of Contents
Advertisement
Item
Resetting using hours of spindle
motor
6.2.1. Caution to be taken when replacing the optical pick-up
The optical pick-up may break down due to the static electricity of human body. Take proper protection measures against static electricity
before repairing the parts around the optical pick-up. Refer to "Handling Precaution for TraverseDeck".
- Do not touch the area around the laser diode and actuator.
- Do not judge the laser diode with a tester.
- It is recommended to use an antistatic soldering iron for short-circuit or removing the laser diode. /
(Recommended soldering iron) HAKKO ESD Product
- Solder the land of the flexible cable in the optical pick-up.
Note:
When using a soldering iron which is not antistatic, short-circuit the terminal of the flexible cable first. After that, short the land.
Play mode and button combination
Press "
" button on the
remote control unit while pressing
the "STOP" button on the player.
Display
T2_0000
Advertisement
Table of Contents
