Table of Contents
Advertisement
3. Finish the procedure with tilt adjustment.
7.4.1.3. Check after adjustment
Play test disc or any other disc to make sure there is no picture degradation in the inner, middle
and outer peripheries, and no audio skipping. After adjustment is finished, lock each adjustment
screws in position using screw lock.
7.4.1.4. Procedure for screw lock
1. After the adjustment is performed, reassemble top cover, clamper
base, disc tray and traverse unit.
2. Lay the traverse unit upside down, fix adjustment screw with
screw lock. Refer to
3. After fixing, assemble traverse unit, disc tray, clamper base, top
cover.
Fig. 7-2
.
Fig. 7-2
18
Advertisement
Table of Contents
