Philips Q Line 43BDL3511Q User Manual page 33

IR Control
Select the operation mode of the remote control when
multiple displays are connected via an RS232 connection.
• {Normal} - All displays can be operated normally by the
remote control unit.
• {Primary} - Designate this display as the primary display
for remote control operation.
Only this display can be operated by the remote control.
(In primary mode, IR key will always be processed regardless
the monitor id/group settings).
• {Secondary} - Designate this display as the secondary
display.
This display can not be operated by the remote control, and
will only receive the control signal from the primary display
via the RS232 connection.
• {Lock All} / {Lock all but Volume} / {Lock all but Power} /
{Lock all expect PWR & VOL}
- Lock the remote control function of this display.
To unlock, press and hold the INFO button on the remote
control for 6 (six) seconds.
Keypad Control
Choose to enable or disable the display keyboard (control
buttons) function.
• {Unlock} - Enable the keyboard function.
• {Lock All} / {Lock all but Volume} / {Lock all but Power}
/ {Lock all expect PWR & VOL} - Disable the keyboard
function.
Power Save
Mode 1 [TCP off, WOL on, auto off]
Mode 2 [TCP off, WOL on, auto on/off]
Mode 3 [TCP on, WOL off, auto on/off]
Mode 4 [TCP on, WOL off, no auto on/off]
Power save modes
Mode 1:
DC off -> Power off. LED: Red.
Power Save -> Power off. LED: Red
Mode 2:
DC off -> Power off. LED: Red.
Power Save -> Power off. LED: Orange.
Mode 3:
DC off -> Power off. LED: Red.
Power Save -> Power Saving. LED: Orange.
Mode 4:
DC off -> Power off. LED: Red.
Power Save -> Will not enter power save mode. Show "no
signal" only.
Mode 1
[TCP off, WOL on, auto off ]
RCU Power
No Signal
Button Off
DC off DC off
43BDL3511Q/50BDL3511Q/55BDL3511Q
Mode 2
[TCP off, WOL on, auto on/off]
Mode 3
[TCP on, WOL off, auto on/off]
Mode 4
[TCP on, WOL off, no auto on/
off]
Off Timer
Set automatically power off time (in hours).
USB Autoplay
Choose to play source type. The options are: {Off} / {On}.
NOTE:
To use USB Autoplay
1. Create a folder which should be named as "autoplay" in
the USB disk.
2. Put the sources(PHOTO/Movie) which should be named as
alphabet and digital in the autoplay folder.
3. After boot on or inserting USB on the system, USB
Autoplay function starts automatically.
Slideshow Duration
Duration of each picture for USB autoplay and USB Play List.
USB PlayList
Choose 1 playlist to play, support up to 7 playlists.
NOTE:
To use USB Playlist
1. Create a folder which should be named as "playlistN" in
the USB disk.
(N means playlist number1~7, ex: USB Play List 1: "playlist1"
folder in USB)
2. Put the sources(PHOTO/Movie) which should be named as
alphabet and digital in the "playlistN" folder
USB Cloning
Copy PD settings from one set to another.
Import: Import settings from another set.
Export: Export settings to another set.
Firmware update
Update firmware via USB disk.
Factory Reset
Reset all your customized settings to the factory default
values.
Option Reset
Reset all settings in the Option menu to factory preset values.
31
When signal is back,
DC off
system wake up
When signal is back,
Backlight off
system wake up
Backlight on, show
Backlight off
no signal