Philips Q Line 43BDL3511Q User Manual page 32

43BDL3511Q/50BDL3511Q/55BDL3511Q
The current implementation of daylight saving is a reminder
tool for the user who doesn't know how to adjust the clock of
daylight saving.
It does not adjust the real time clock automatically. The
problem is that there are no standard rules on when to adjust
the clock defined by region or country. To solve this problem,
the user must be able to set the daylight saving start/end
date. When daylight saving correction is on (user selectable)
then the real time clock should be adjusted at the time set of
the daylight saving on/off date. At the start date of daylight
saving, the clock should be adjusted 1 hour forward at 2 o'clock.
At the end date of daylight saving, the clock should be adjusted
1 hour backward at 2 o'clock.
The existing daylight on/off menu should be replaced by the
following menu structure:
The menu item {Daylight saving} opens the submenu that
contains the following items:
• Menu item {Daylight saving start date} Selection item {1st,
2nd, 3rd, 4th, last} Sunday of selection item {1-12 month}
Menu item {Daylight saving stop date} Selection item {1st,
•
2nd, 3rd, 4th, last} Sunday of selection item {1-12 month}
Menu item {Correction time} Selection item {0.5, 1.0, 1.5,
•
2.0} hour
• Menu item {Daylight saving} Selection item {on, off}
When "daylight saving" is "on", the real time clock will be
adjusted automatically at the daylight saving time (e.g. April 5,
2015, 02.00 o'clock: time will be set 1 hour later or October 25,
2015, 02.00 o'clock: time will be set 1 hour earlier).
Schedule
This function allows you to program up to 7 (seven) different
scheduled time intervals for the display to activate.
You can select:
• The time for the display to turn On and Off.
• The days in a week for the display to activate.
• Which input source the display will use for each scheduled
activation period.
NOTE: It is recommended that you set up the current date
and time in the {Date and time} menu before using
this function.
1. Press [OK] or [ ] button to enter the submenu.
Schedule 1
Schedule 2
Schedule 3
Schedule 4
Schedule 5
Schedule 6
Schedule 7
2. Press [ ] or [ ] button to select a schedule item (item
number 1 - 7), and press [OK] or [ ] button to enter the
submenu.
Schedule
Schedule 1
Schedule 2
Schedule 3
Schedule 4
Schedule 5
Schedule 6
Schedule 7
{Status} - Press [ ] or [ ] button to select the status On or
•
Off.
• {Source} - Press [ ] or [ ] button to select the input source.
{On Time} - Press [ ] or [ ] button to adjust and the display
•
will turn on at the specified time.
• {Off Time} - Press [ ] or [ ] button to adjust and the
display will turn off at the specified time.
Leave hour and minute options empty if you do not want to
use the function of power-on or power-off schedule.
{Repeat modes} -Press [ ] button to select which day in a
•
week this schedule item will take effect, and then press the
[OK] button.
NOTE:
The scheduler cannot work cross midnight in one schedule
with no repeats or only one schedule day is selected.
3. For additional schedule settings, press [
steps above. A check mark in the box next to the number of
the schedule item indicates that the selected schedule is in
effect.
NOTES:
• If the schedules overlap, the scheduled power-on time takes
priority over scheduled power-off time.
• If there are two schedule items programmed for the same
time, the highest numbered schedule takes priority. For
example, if schedule items #1 and #2 both set the display to
power on at 7:00 AM and off at 5:00 PM, then only schedule
item # 2 will take effect.
HDMI EDID
Switch HDMI EDID type: {HDMI 1.4}, {HDMI 2.0}.
HDMI with One Wire
CEC control.
• {Off} - Disable CEC.(Default)
• {On} - Enable CEC.
Input Resolution
Set the resolution of the VGA input. This is only required
when the display is unable to detect the VGA input resolution
correctly.
NOTE: This item is functional for VGA input only.
The options are:
• {1024x768 / 1280x768 / 1360x768 / 1366x768}
• {1400x1050 / 1680x1050}
• {1600x1200 / 1920x1200}
• {Auto}: Determines the resolution automatically.
The selected settings will become effective after turning off the
power and turning it on again.
30
Schedule
Status On
Source HDMI1
On Time -- : --
Off Time -- : --
Repeat modes
], then repeat the