Philips Q Line 43BDL3511Q User Manual page 31

The options are: {5 ~ 100} seconds.
OSD Transparency
Adjust OSD transparency.
• {0} - Transparency off.
• {1-100} - Transparency level 1-100
Information OSD
Set the period of time the information OSD is displayed on
the upper right corner of the screen. The information OSD
will display when input signal is changed.
The information OSD will remain on the screen with {Off}
selection.
The options are: {1 - 60} seconds.
Logo
Choose to enable or disable the picture of Logo when
turning on your display.
The options are: {Off} /{On}
Monitor ID
Set the ID number for controlling the display via the RS232
connection.
Each display must have a unique ID number when multiple
sets of display are connected. Monitor ID number range is
between 1 to 255.
• {1-255} – {Monitor ID} The default setting is 1.
• {1-255} – {Monitor group} The default setting is 1.
• {1-15} – {Tiling matrix} The default setting is 1.
• {Auto ID} The {Auto ID} setup function enables setting up
{Monitor ID} of connected machine according to {Tiling
matrix} settings. Example: Tiling matrix sets as 4
• {Tiling matrix}: Tiling matrix number range is between 1
to 15. The default setting is 1.
Monitor Id
Monitor Id
Monitor group
• {Auto ID}: The option are: {Start} / {End}. The default is
{End}.
• Switch to Start option to set up IDs of machines backward
from current one.
Once the setup is completed, the option exits to End
automatically.
To use this function, serially connect all machines with
RS-232 cable and set their Control ports to RS-232 too.
1 2
5 6
9 10
13 14
1
1
3 4
7 8
11 12
15 16
43BDL3511Q/50BDL3511Q/55BDL3511Q
Monitor information
Shows information about your display, including Input
source, Resolution, Model name, SW version, serial number,
operation hours and MAC address.
Monitor information
Model name
Serial NO.
Operation hours
SW Version
MAC address
Configuration reset
Reset all settings in Configuration menu to the factory preset
values.
6.2.7. Option
PICTURE
SCREEN
AUDIO
TILING
NETWORK
CONFIG
OPTION
Language
Set OSD menu language.
Auto signal detection
This function allows the display to detect and display
available signal sources automatically.
• {Off} - Once an input is connected, it can only be selected
manually.
If the selected input has signal, set the system to display the
image automatically according to the search order of each
option.
The options are: {Auto} / {Failover}
• {Auto}: VGA->DVI->HDMI1->HDMI2->USB
• {Failover}
- Failover 1: User-defined setting. Default:HDMI 1.
Failover 2: User-defined setting. Default:HDMI 1.
-
Failover 3: User-defined setting. Default:HDMI 1.
-
Failover 4: User-defined setting. Default:HDMI 1.
-
Failover 5: User-defined setting. Default:HDMI 1.
-
- Failover 6: User-defined setting. Default:HDMI 1.
Failover 7: User-defined setting. Default:HDMI 1.
-
Date and time
Set the current date and time for the display's internal clock.
NOTES:
The definition and behavior of the Daylight saving time:
29
XXXX
XXXX
XXXX
XXXX
XXXX
Language English
Auto signal detection
Date and Time
Schedule
HDMI EDID 2.0
HDMI with One Wire Off
Input resolution
IR Control
Keypad Control
Power Save
Off Timer
Off