Selecting The Metering Method - Pentax ist ist DL Operating Manual

130

Selecting the Metering Method

Choose the part of the screen to use for measuring brightness and
determining exposure. [Multi-segment metering], [Center-weighted
metering] or [Spot metering] mode can be selected. The default setting is
[Multi-segment].
Multi-segment
L
M
weighted
Spot metering
N
Set in [AE Metering] in the [A Rec. Mode] menu. (p.98)
5
Rec. Mode
Instant Review
Auto Bracket
AE Metering
Focusing Area
AF Mode
Flash Exp. Comp.
Cancel
Using the Multi-Segment Metering
The scene in the viewfinder is metered in
16 different zones as shown in the
illustration when using the multi-segment
metering. This mode automatically
determines what level of brightness is in
which portion.
The center-weighted metering mode is automatically set even if you select the
multi-segment metering mode when using a lens other than a DA, D FA, FA J,
FA, F or A lens. (Can only be used if permission is set in [Using aperture ring]
in the [A Custom] menu (p.101).)
Segment the screen in 16 parts, meter each portion and
determine the appropriate exposure.
Center- Measure the entire screen with an emphasis on the
center and determine the exposure.
Measure only the center of the screen and determine
exposure.
1 sec
0.0
OK
OK