Table of Contents
Advertisement
r Touch Screen Calibration
You can calibrate the key positions of the touch screen if
you feel the touch screen key is not responding properly.
Press the Yes key to open the calibration window.
Press the "+" sign with the touch panel stylus as the sign
appears.
When you press the last sign, the screen shows "END"
and the calibration window will close.
t Formatting the memory
If the internal memory of the machine or USB flash drive
r
does not function due to damage to the memory bank,
you need to re-enable it by formatting the memory.
To format the machine's internal memory, press the
machine icon key and a confirmation message will
t
appear. Press the OK key to format.
To format a USB flash drive, press the USB icon and
the confirmation window will open. Press the OK key to
format.
y
CAUTION:
Do not turn off the power or disconnect the USB flash
drive while a warning message is displayed otherwise it
may damage the memory bank.
y Standby Timer
The sewing lights will turn off and the machine will enter
standby mode if you do not use the machine within the
time period set by this timer. Doing any operation will turn
the lights and screen on again.
The standby timer can be set from 1 to 30 minutes.
If you wish to turn off the timer, press and hold the "+" key
until "OFF" shows in the timer window.
Press the next page key to show the next menu.
92
Advertisement
Table of Contents
