Built-In Needle Threader - ELNA eXtend covermax Instruction Manual

z
w
x
r
c
t
L
M
R

Built-in Needle Threader

Thread the needles with the built-in needle threader.
q
Turn off the power switch before threading the
e
machine.
Make sure the top cover stitch spreader is stored to
the machine when using the built-in needle threader
(refer to page 38).
NOTE:
Do not use #30 or thicker threads.
z Turn the handwheel toward you to match the mark on
x Lower the presser foot lifter.
c L: Set the needle threader switch lever to L when
19
CAUTION:
the machine with the setting mark on the handwheel.
q Handwheel
w Mark
e Setting mark
r Presser foot lifter
threading the left needle.
M: Set the needle threader switch lever to M when
threading the center needle.
R: Set the needle threader switch lever to R when
threading the right needle.
t Needle threader switch lever