Using Foot Control - ELNA eXcellence 790PRO Instruction Manual

q
e
t
r
c
z
v
x
u
w
y
11

Using foot control

If you wish to use the foot control, pull out the cord from
the foot control and insert the pin connector into the jack
on the machine.
z First make sure the power switch q is off.
x Insert the machine plug w of the power supply cable
into the machine socket e.
c Draw out the cord from the foot control and insert the
pin connector r into the jack t on the machine.
v Insert the power supply plug y into the wall outlet u,
and turn the power switch q on.
q Power switch
w Machine plug
e Machine socket
r Pin connector
t Jack
y Power supply plug
u Wall outlet
NOTE:
The start/stop button does not work when the foot
control is connected.